Manual For 19 Hp Kawasaki Fh601v Carburetor

Kawasaki FH601V engine motor flywheel 19 HP. Carburetor For Kawasaki FH580V 19Hp Engine Exmark Husqvarna John Deere 235 Mower. Kawasaki FH580V. Carburetor Assembly Kawasaki FH601V-DS06. Caster Wheel Assembly No. Fuel Tank/Fuel Valve Assembly Kawasaki FH601V-DS06. Height of Cut Assembly. Hydraulic Pump Assembly No. 19 hp Engine/Motor Type 4 Cycle CARB2, EPA2. KAWASAKI HEAVY INDUSTRIES, LTD. Motorcycle & Engine Company ©2008KawasakiHeavyIndustries,Ltd. 2010(1)(M) Please note that the photographs and illustrations shown in this manual are made based on Model FH601V. Find all the parts you need for your Kawasaki Small Engine FH601V/BS15 at RepairClinic.com. We have manuals, guides and of course parts for common FH601V/BS15 problems.

Kawasaki FH601V Exploded View parts lookup by model. Complete exploded views of all the major manufacturers. It is EASY and FREE.

STANDERMAN27

LawnSite Member
For
Hi I have a 2007 Wright Stander with a Kawasaki FH601V Engine.
I just purchased the mower from a previous landscaper,
He had told me that the oil leak was not bad, but it is...
The Kawasaki Motor is leaking Oil directly from behind the throttle plate..
I know its hard to see in the picture, but its leaking out of the metal round shaft that is coming out of the crank case, which is attached to a spring that goes to the carb...
anyone have any idea how hard this is to fix? I think its an O ring? I have never seen this problem before..
I took the top engine shroud off and there is no oil leaking from the top of the engine.. just from this shaft??? any help??? Thanks in advance!!
This picture shows where the oil is dripping from.. Its dripping from the dark thing at the top of the pic.. FYI this is a pic of behind the throttle plate on the front of the engine..
Carburetor
Fuel Shut Off Solenoid Valve (Electric Starter Model)
To avoid after firing when stopping the engine, a solenoid actuated
fuel shut off solenoidvalve[A] is installed in thecarburetor bowl.The
valve shuts off the fuel supply to the valve seat [B] simultaneously when
The valveopens automatically whenthe switch key is turned to the
Low Idle Speed Adjustment
Kawasaki fh601v carburetor parts diagram
Disconnect all possible external loadsfrom the engine.
Always keep your hands clear of the moving parts.
Move the throttle lever on dash to the idle position,and hold the
throttle lever onthe carburetorin closed position (turn the governor
armclockwiseall the way)and adjust the low idle speedscrew [A]
until the engine idles at specifiedspeed.- FH451V, 500V, 531V.
Adjust the low idle speed screw [C] with Phillips Screwedriver [D] until

Manual For 19 Hp Kawasaki Fh601v Carburetor Briggs & Stratton

the engine idles atspecified speed.– FH601V, 641V, 680V, 721V.
1450 rpm
Release the throttle lever and adjust the low idle speed set screw[B]

Kawasaki Fh601v Carburetor

on the control plate to obtain the specifiedgoverned low idle speed.
1550 rpm
NOTE
High idle speed adjustmentshould bemadeafter the idle speed
CAUTION
Do not adjust highidle speedwith the air cleaner removed.